I'm learning about electronics bit by bit, making projects and tearing things apart
Sep 2nd, 2012 by Alex
I received the PCBs for my ATtiny Programmer Adapter v1.1.
Built it up and it works well, I’m happy with it. The ISP connector is a tight fit, if I made the 6 pin / 10 pin ISP connectors any closer the connector wouldn’t fit. Tested all slots except the ATtiny48/88 slot as I don’t have one of those MCUs.
Should have probably added an LED to show there is power to the board. Need to buy some machine pins to make it easier to insert/remove the chips.
 |
AdvanceVGA – Play your GBA on the big screen! Swap out the LCD for our board, solder some wires, connect 5V USB and VGA and you’re ready to go. |
 |
GBxCart RW allows you to backup GB/GBC/GBA ROMs, save or restore game saves and re-write supported flash carts. Mini RW option available for GB/GBC only. |
 |
Gameboy flash carts: 32KB Flash Cart 32KB 4KB FRAM Flash Cart 1MB 128KB SRAM Flash Cart 4MB 128KB SRAM Flash Cart 4MB 128KB FRAM Flash Cart |
 |
GBA carts: 32MB, 1Mbit Flash Save (for Pokemon games/hacks) 32MB, 512Kbit Flash 32MB, 4K/64Kbit EEPROM 32MB, 256Kbit FRAM |
 |
Wireless Gameboy Controller – Use your Gameboy, mGB, GBC, GBA, GBA SP, GB Micro, NDS and NDS Lite as a wireless controller on Windows, Linux, Raspberry Pi, etc, and on your NES, SNES, N64, Gamecube and Wii. |